Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 62 page image

62Chapter 6. Error CodesThe following tables provide a description of the error codes and the recommend solution:ErrorCode Error Message Description & Recommended Solutions41Description:Read errors exceed the specified limitPossible Solution:Replace with new master OR change Read Retries setting inSetup menu.200 Source DiscEmptyDescription:The intended master disc is detected and identified successfully,but it is a blank disc.Possible Solution:Please double check the master disc to ensure it contains data.201 Bad MasterDescription:The master disc is detected but cannot be identified within 3minutes.Possible Solution:Please check the master disc for quality, defects or errors.202 No Targets!Description:The blank disc(s) are missing when the job starts.Possible Solution:Please make sure blank discs are placed in Writer trays.203Burner Mixed orFirmware versionMixedDescription:The model or firmware version of the writers in the duplicator isnot the same.Possible Solution:This typically happens when you have recently replaced a Writerdrive. Contact Tech Support.204 Targets & MasterNot Compatible!Description:The master disc and targets (blanks) are not of the same format.The Kanguru Duplicator can’t cross copy across different mediaformats.Possible Solution:Please go to Disc Info in the Advanced Setup menu to makesure the master disc and the blank discs are the same format (seesection “3.13.14.1 Disc Info” on page 44).Error Codes