Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 16 page image

163.4.2 Making copies from an existing hard drive partition (hard drive models only)Using the hard drive as the master copy source is the best way to make copies. Since you won’t need tooccupy the Reader drive with a master disc, you will have one additional drive to use for burning copies.Using the hard disc as the master copy source improves:• Performance - Copying from the hard drive enables the writer drives to boost the copying performanceto the limit.• Stability - Copying from the hard drive allows a more stable duplication process than disc-to-discduplication.• Durability – The hard drive is a more durable storage device than recordable discs. The recordingsurface of a recordable disc is exposed and can easily be scratched, potentially corrupting data. Thehard drive is shielded and mounted inside the unit, protecting it from incidental damage.• Convenience – With your master copy sources stored inside the hard drive, you have convenientaccess to each one. There is no need to search for a master disc every time you want to make a copy;they are all stored inside the system.Before you can make copies from an existing hard drive partition, make sure you have loaded an image ofthe Master disc onto the hard disk drive (see section “3.16.2 Load Partition” on page 54) and that thehard disk drive is selected as your source drive (see section “3.10 Select Source” on page 30).Counter :No CounterKanguru Solutions1. Copy1. From the Main Menu, press the UP or DOWN buttonto navigate to Copy. Press the ENT button to enter theCopy menu.2. You will see the Choose Partition menu. Use the UP orDOWN button to select the image that you want to copyfrom and then press the ENT button to confirm yourselection. Note: If you receive a “Hard drive is empty”error message, there are no images loaded on the harddrive. For more information on loading images, pleasesee section “3.16.2 Load Partition” on page 54.3. You will see the Counter screen. For more informationon the Counter, see section “3.2.2 Setting a Job Counter”on page 11.Choose Partition[TEST1.VEF] 401MBOnce you have set the Counter, any trays that do not contain discs in them will automatically be ejected.You will see the following Preparation screens:Preparing...Waiting for MasterPreparing...Waiting for BlanksCopy