Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 49 page image

493.13.14.6 System Counter (hard drive models only)The System Counter function keeps a record of the number of Copy operations were performed, how manypassed, how many failed as well as the total operating time for CDs, DVDs and BDs (BDs for Blu-raymodels only).Advanced Setup6. System Counter1. From the Advanced Setup menu level, use the UP orDown button to navigate to System Counter. Press theENT button to enter the System Counter menu.The screen will display the total mileage of the DVDdrives, including the number of successful copies(PASS) and unsuccessful copies (FAIL) created by thedrive.2. Press the ENT button to proceed to view informationon the CD drives. Press the ENT button again to viewinformation on the BD drives (if you did not purchasea Blu-ray model, this will always display 0’s for PASSand FAIL.3. Press the ENT button again to view the Total UsageTime screen. This will display the total number of hoursand minutes the drives have been operating for. Youcan view the total usage time for individual drives bypressing the UP or DOWN button.Total Mileage of DVDPASS : 21 FAIL : 0Total Mileage of CDPASS : 21 FAIL : 0Total Usage Time1H 45M4. Press the ESC button to exit to the Advanced Setup menu.3.13.14.7 Update FirmwareThe Update Firmware function will allow you to update your system’s firmware version. We stronglysuggest that you do not upgrade your system’s firmware unless specifically instructed to do so by a KanguruSolution’s Technician. For more information, please contact Kanguru Solutions Technical Support at 508-376-4245.Job Counter / Update Firmware