Kanguru U2-DVDDUPE-S User Manual

Contents

Kanguru U2-DVDDUPE-S User Manual Manual pdf 42 page image

423.13.12 OverburnOverburning is the process of recording data past the normal size limit. Many disc manufacturers extendthe recordable area on a disc, leaving a small margin of extra recordable area along the outer edge. TheOverburn setting allows you to turn On or Off the ability to burn to the overburn area on a disc. The defaultsetting is Off.WARNING! Turning the Overburn setting to On may cause damage to your discs or Writer drives duringthe burn process.Setup12. OverburnOverburn :Off1. From the Setup Menu, press the UP or DOWN button tonavigate to Overburn. Press the ENT button to enter theOverburn menu.2. Press the UP or DOWN button to select On or Off. Pressthe ENT button to confirm your selection. You will exitto the Setup Menu.3.13.13 Select Loading DriveThe Select Loading Drive setting allows you to choose which disc drive you want to use as the Loadingdrive. The Loading drive is the drive used to load an image from a source DVD/CD/BD to a partition onthe hard drive.Setup13. Select Loading DriveDrive 1 Port 0Drive 1 Port 0Selected!1. From the Setup Menu, press the UP or DOWN button tonavigate to Select Loading Drive. Press the ENT buttonto enter the Select Loading Drive menu.2. Press the UP or DOWN button to select a disc drive.Press the ENT button to confirm the selected drive.3. After you have confirmed the Loading drive, you willsee the Selected screen before returning to the SetupMenu.Note: If you press the ENT button and are returned tothe Setup Menu without seeing the Selected screen, itmeans that the drive was already selected as the Loadingdrive.Overburn / Select Loading Drive