Kenwood DMX1037S Instruction Manual

Connection/Installation326 HDMI inputUse HDMI cable KCA-HD100 (optionalaccessory).When you connect the cable to HDMI terminal,remove the fixture. After connecting the cable,put the fixture again.FixtureHDMI connector7 iDatalink connector8 Dashboard camera interfaceConnect a Dashboard Camera DRV-N520(optional accessory). (P.34)9 AV Audio input (ø3.5 mini jack)10 Accessory 6: GPS AntennaUse the supplied GPS antenna. Using the GPSantenna other than the supplied one maycause a drop in positioning accuracy.11 3rd view camera input (Yellow). See To set upthe camera assignment settings (P.34).12 Rear view camera input (Yellow)*113 Front view camera/Dashboard camera input(Yellow).* 2See To set up the camera assignmentsettings (P.34).14 Video output (Yellow)15 Video input (Yellow)*1 Connect an HD camera to Rear view camerainput terminal to use HD video.*2 Connect an HD camera to Front view camera/Dashboard camera input terminal to use HDvideo.Ñ Securing the USB extensioncableSecure the USB extension cable with insulatingtape or the like so that its connectors are notdisconnected.Ñ Connecting a USB deviceUSB device [2]USB terminal[1]Accessory 2 (1 m) [3][1] USB maximum power supply current :DC 5 V = 1.5 A[2] Sold separately[3] See Securing the USB extension cable(P.32).