Kenwood DMX1037S Instruction Manual

Remote control79EnglishRemote controlThis unit can be operated using the remotecontrol KNA-RCDV331 (optional accessory).# CAUTION• Risk of fire or explosion if the battery isreplaced by an incorrect type. Ensure toreplace only with the same type.• Risk of fire, explosion or the leakage offlammable liquid or gas if the battery is left inan extremely high temperature surroundingenvironment and/or subjected extremelylow air pressure. The battery pack or batteriesshall not be exposed to excessive heat such assunshine, fire or the like.• Risk of fire, explosion or the leakage offlammable liquid or gas if the battery isdisposed into fire or a hot oven, recharged,shorted, mechanically crushed or cut of thebattery.• If spilled fluid comes in contact with your eyesor on clothing, immediately rinse with waterand consult a physician.Battery InstallationIf the remote control operates only overshorter distances or does not operate at all, itis possible that the batteries are depleted.In such instances, replace the both batterieswith new ones.1 Insert two “AAA”/“R03”-size batterieswith the and poles aligned properly,following the illustration inside the case.Functions of the Remotecontrol ButtonsÑ Switch the operation modeThe functions operated from the remotecontrol differ depending on the position of themode switch.DVDT VNAVAUD••••■ AUD modeSwitch to this mode when controlling aselected source or tuner source, etc.■ DVD mode/TV mode/NAV modeNot used.NOTE• When controlling a player that is not integrated inthe unit, select “AUD” mode.