Kenwood DMX1037S Instruction Manual

Setup62■ [Device Name]If you select [ON] for [Bluetooth], you canchange the Bluetooth device name.See Change the device name (P.47).■ [PIN Code]If you select [ON] for [Bluetooth], you canchange the PIN code.See Change the PIN Code (P.47).■ [Device address]Display the Bluetooth device address.■ [TEL SETUP]You can make various settings for the Hands-Free function.See Hands-Free Setup (P.55).■ [Wi-Fi SETUP]You can change the device name and displaythe device address, password. See Changethe device name (P.62).■ [Speech Quality Adjust]Adjust the speech quality.[Microphone Level] : Adjust the level ofmicrophone gain. Default is “0”.[Echo Cancel Level] : Adjust the level ofecho cancellation. Default is “0”.[Noise Reduction Level] : Reduce the noisegenerated in the surrounding environmentwithout changing the microphone volume.Use this function when the voice of caller isnot clear. Default is “0”.■ [iPod Bluetooth Connection]See Select the method of makingconnections for outputting sound fromthe iPod source (P.24).■ [AV-OUT]You can select an AV source to be outputfrom the AV OUTPUT port.OFF, iPod, USB, or AV-IN• You cannot select AV-IN if the Video inputterminal is used for camera.• You cannot select iPod if it is connected viaBluetooth or Apple CarPlay is connected.• If you select iPod as the main source, youcannot select USB as the AV output source.• If you select USB as the main source, youcannot select iPod as the AV output source.• If you select HDMI as the main source, fileswith sampling rates higher than 96 kHz inUSB selected as the AV output source areskipped.• If you select Bluetooth audio, HD Radio,Wireless Mirroring, Apple CarPlay orAndroid Auto as the main source, youcannot select USB or iPod as the AV outputsource.■ [Reset Android Auto WirelessConnection]You can change the password for wirelessAndroid Auto.The system of the unit is rebooted afterselecting [YES].Ñ Change the device name1 Touch [Device Name] in the Connections& AV setting menu.orTouch [Wi-Fi SETUP] and then touch[Device Name].hh Change Device Name screen appears.2 Touch and hold [ ].3 Input the device name.4 Touch [Enter].