Kenwood DMX1037S Instruction Manual

Other External Components56Other External ComponentsView CameraNOTE• To connect a camera, see Connecting thecamera (P.94).• To use a rear view camera, a REVERSE leadconnection is required. (P.90)• If [Rear Camera Interruption] is active thecamera screen is displayed when you shift thegear to the reverse (R) position.• The camera whose view was displayed last is keptand the same camera view will be displayed thenext time. If its assignment setting is changed, therear camera view is displayed.• Rear/front camera interruption screen is not keptas the camera screen which will be displayed thenext time.Ñ Display the camera screen1 Press the [MENU]/[ATT] button.hh Popup menu appears.2 Touch [Camera].hh View camera screen appears.3 Adjust each item as follows.23 411 Camera Switching Keys * 1Touch to switch the view camera. It isnecessary to set “Camera AssignmentSettings” beforehand except “Rear”. See Toset up the camera assignment settings(P.57).2 Camera offTouch to exit the camera screen.3 Switching the Guideline * 2Touching each time turns on or off theguideline.4 Switching the Angle * 2Touching each time changes camera angles.*1 When two or more cameras of rear, front,dashboard, left, right, and 3rd are connectedwith this unit.*2 Only when the rear camera screen isdisplayed and CMOS-3xx series is connectedwith this unit as the rear camera.Ñ Camera Setup1 Press the [HOME]/[ ] button.2 Touch [ ].3 Touch [SETUP].hh SETUP Menu screen appears.4 Touch [Camera].hh Camera setting menu appears.5 Set each item as follows.■ Camera Assignment SettingsSet up the camera assignment. See To set upthe camera assignment settings (P.57).■ [Rear Camera Interruption][ON] (Default): Displays the picture from therear view camera when you shift the gearto the reverse (R) position.[OFF]: Select this when no camera isconnected.