Kenwood DMX1037S Instruction Manual

APPS16APPSWireless Mirroring OperationYou can display the same screen of theAndroid smartphone on the monitor of theunit using the Wireless Mirroring function ofthe Android smartphone.Preparation• You can use the Wireless Mirroring functionwith Android smartphones compatible with thisfunction.• This function may be called Wireless Display,Screen Mirroring, AllShare Cast, etc., dependingon the manufacturer.• The settings on the Android smartphone differdepending on the device type. For details, referto the instruction manual supplied with yourAndroid smartphone.• If your Android smartphone is locked, Mirroringscreen may not appear.• If the Android smartphone is not ready for UIBC,you cannot perform touch operation.1 Press the [HOME]/[ ] button.2 Touch [ ].3 Touch [Wireless Mirroring]. (P.10)hh The App screen is displayed.4 Operate your Android smartphone toactivate the Wireless Mirroring function,then connect to this unit.5 Select (”DMX****”) as the network to use.hh When the connection is established,then the same screen displayed on theAndroid smartphone is displayed.NOTE• Apps is discontinued when the power is turnedON/OFF or you leave the vehicle. To restart Apps,operate the Android smartphone.• When the Apps source is displayed, you cannotregister or reconnect a Bluetooth device. Switchthe Apps source to another source, and thenoperate the Bluetooth device.Apple CarPlay OperationApple CarPlay is a smarter, safer way to useyour iPhone in the car. Apple CarPlay takesthe things you want to do with iPhone whiledriving and displays them on the screen ofthe product. You can get directions, makecalls, send and receive messages, and listen tothe music from iPhone while driving. You canalso use Siri voice control to make it easier tooperate iPhone.For details about Apple CarPlay, visit https://www.apple.com/ios/carplay/.Compatible iPhone devicesYou can use Apple CarPlay with the followingiPhone models.• iPhone XS Max• iPhone XS• iPhone XR• iPhone X• iPhone 8 Plus• iPhone 8• iPhone 7 Plus• iPhone 7• iPhone SE• iPhone 6s Plus• iPhone 6sÑ Connecting an iPhoneWired connection1 Connect your iPhone using KCA-iP103 viathe USB terminal. (P.93)When an iPhone compatible with AppleCarPlay is connected to the USB terminal,the Bluetooth Hands-Free phone currentlyconnected is disconnected. If anotherBluetooth Hands-Free phone is being used,disconnection will occur after ending thecall.2 Unlock your iPhone.