Kenwood DV-5050M Instruction Manual

Also see for DV-5050M: Service manual Service manual

Contents

Kenwood DV-5050M Instruction Manual Manual pdf 16 page image

16Chapter 1: Connection of EquipmentChapter 1Chapter 2Chapter 3Chapter 4Chapter 5Chapter 6Chapter 7Chapter 81-6-3 : Digital output connection1221LRDIGITALDVDCONTROLCONTROLMAINMAIN-SUBSWITCHSUB2SUB1COAXIALI NOUT OUTINPUT OUTPUT FRONT SURROUND CENTERSUB WOOFERDAISY CHAIN AUDIO COMPONENT VIDEO S VIDEO VIDEOOUTPUT6 CH. OUTPUT INPUT INPUTY C B C R Y C B C ROUTPUT OUTPUTMIX LINEOPTICAL(PCM/BIT STREAM)INTERLACE PROGRESSIVECOMPONENTVIDEOOUTPUTCOAXIAL OPTICALCoaxial cable(Provided)Dust protection cap Align the plugwith the terminalIllust model : DV-5900MOptical cableSpeaker SettingorNote : When connecting the optical digital audio cable÷ Remove the dust protection cap from the optical digital audio output terminaland connect the cable firmly so that the configurations of both the cable andthe terminal match.÷ Keep the dust protection cap and reattach when not using the terminal.1221LRDIGITALDVDCONTROLCONTROLMAINMAIN-SUBSWITCHSUB2SUB1COAXIALI NOUT OUTINPUT OUTPUT FRONT SURROUND CENTERSUB WOOFERDAISY CHAIN AUDIO COMPONENT VIDEO S VIDEO VIDEOOUTPUT6 CH. OUTPUT INPUT INPUTY C B C R Y C B C ROUTPUT OUTPUTMIX LINEOPTICAL(PCM/BIT STREAM)INTERLACE PROGRESSIVECOMPONENTVIDEOOUTPUTIllust Model : DV-5900MSpeaker SettingTo 6ch Input terminal1-6-2 : 6 channnel (5.1 ch) audio connection (DV-5900M only)÷ When a DVD AUDIO disc is played, the player can output audio signals at veryhigh frequencies. As this may sometimes lead to speaker damage due to a high-volume sound, do not set "Audio Filter" to "Filter 110 kHz" when the speakersin use are not suitable for high-frequency reproduction. j÷ When connection of 3 or more channels is required, connect the audio inputsto the 6ch OUTPUT connectors on the rear panel according to the speakers inuse.After connection, set the non-used speakers to “OFF” with the “Speaker setting”function. kSetup for 6-channel audio connection:÷ When the audio is connected using the 6CH. OUTPUT terminals, set the playeras follows. "Speaker Setting" kWhen the connected AV amplifier has 6-channel audio input terminals, Please con-nect the 6CH. OUTPUT terminals to them.Use the DIGITAL output terminal when using an external decoder (or an AV amplifierwith built-in decoder) to decode Dolby Digital and DTS Digital Surround signals.To use the external decoder, it is required to change the “SOUND” setup in the Set Upmenu. hSpeaker settingThe speakers are to be set up on the amplifier. kAudio filter (Speaker protect)The audio filtering is to be set up on the amplifier. j