Kenwood DV-5050M Instruction Manual

Also see for DV-5050M: Service manual Service manual

Contents

Kenwood DV-5050M Instruction Manual Manual pdf 44 page image

44Chapter 4: OSD OperationChapter 1Chapter 2Chapter 3Chapter 4Chapter 5Chapter 6Chapter 7Chapter 84-4-3 Cinema Voice functionThis function to be used when words are hard to bedistinguished during playback of DVD recorded withDolby Digital Surround, Dolby Digital, DTS, or DVDAUDIO* LPCM.To use this function, it is required that the disc beingplayed provides the center channel audio.*DVD AUDIO is DV-5900M only÷ When the digital output terminal is used, the“Digital Audio” setting should be set to “PCM”or “Off”. hOperation procedure1. Press the ON SCREEN button during playback of DVD,then select the "SOUND" OSD by pressing the cursorup/down button.2. Move the cursor to Off (Cinema Voice icon) bypressing the cursor left/right button, then press theENTER button.÷ The icon can be selected only when the playedsoftware is recorded with Dolby Digital Surround,Dolby Digital, DTS, or DVD AUDIO* LPCM. (withcenter channel).3. Select on or off by pressing the cursor up/downbutton, then press the ENTER button.4-4-4 Down Mix function (DV-5900M only)This function is available with a DVD containing therecording of multi-channel audio.This function converts the multi-channel audio into 2-channel audio and outputs to 6CH OUTPUT L/Rterminals.Operation procedure1. Press the ON SCREEN button during playback of DVD,then select the "SOUND" OSD by pressing the cursorup, down button.2. Move the cursor to Off (Down mix icon) bypressing the cursor left/right button, then press theENTER button.3. Select on or off by pressing the cursor up/downbutton, then press the ENTER button.÷ When a DVD recorded with Dolby Digital audio(with 2 or more channels) is played, the "DOLBYDIGITAL" indicator on the player main unit lightsup.