Kenwood DV-5050M Instruction Manual

Also see for DV-5050M: Service manual Service manual

Contents

Kenwood DV-5050M Instruction Manual Manual pdf 43 page image

43Chapter 4: OSD OperationChapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Chapter 84-4 "SOUND" OSD OperationThis section describes the items which can be controlledwith the "SOUND" OSD. (Some items may beuncontrollable depending on the played disc and playerstatus.)SOUND Off OffENG 5.1ch1 DolbyOffE X I T1 2 3 41 Audio icon: Shows the audio signal, audio languageand audio language No., number of audio channels.Select to switch the audio language.2 Virtual Surround icon: Shows the level of the Vir-tual Surround effect. Select to adjust the level of Vir-tual Surround or switch it off.3 Cinema voice icon: Shows the on/off status of Cin-ema Voice. Select to switch Cinema Voice on or off.r4 Down Mix icon (DV-5900M only): Shows the on/off status of Down mix. Select to switch Down Mixon or off. r4-4-1 Switching the audio languageWhen a VCD or a DVD containing the recording of audioin multiple languages is played, the language used in thevoice can be switched over. (The audio language can alsobe switched directly by pressing the AUDIO button.)Operation procedure1. Press the ON SCREEN button during DVD playbackand select the "SOUND" OSD by pressing the cursorup/down button.2. Move the cursor to ENG 5.1ch1 Dolby(Audio icon) bypressing the cursor left/right button, then press theENTER button.3. Select the desired audio language number by pressingthe cursor up/down button, then press the ENTERbutton.÷ With a DVD AUDIO disc, an audio languagenumber can be selected.5.1ch 96k 24b1 P. PCM(DV-5900M only)÷ With a DVD VIDEO disc, an audio languagenumber can be selected from up to 8 numbers.÷ With VCD, "Stereo", "L", "R" or "L+R" can beselected.÷ The default audio language set by the user isselected when the power is turned on or the disc ischanged. If the default language is not containedin the disc, the priority language defined for thedisc will be played back.4-4-2 Virtual Surround functionWhen playing a DVD recorded with Dolby DigitalSurround audio, powerful sound can be reproduced evenwhen you use only two speakers.Operation procedure1. Press the ON SCREEN button during DVD playback,and select the "SOUND" OSD by pressing the cursorup/down button.2. Move the cursor to Off (Virtual Surround icon)by pressing the cursor left/right button, then pressthe ENTER button.÷ The icon can be selected only when the playedsoftware is recorded in Dolby Digital audio (with2 or more channels).3. Select the level of Virtual Surround effect by pressingthe cursor up/down button, then press the ENTERbutton.DV-5900MOff12HP1HP2OtherOff12The effect is increased when theselected level is higher. Select "Off"to switch the effect Off. To selectthe level of the Virtual Surroundeffect through headphones, select"HP VSS1" or "HP VSS2".The effect is increased when theselected level is higher. Select "Off"to switch the effect Off.(DV-5900M)