| 
English | 13WOW HD Control1 Select the source to adjustPress the [SRC] button.Refer to (page 7).2 Enter WOW HD Control modeUsing the Control knob, select "DSP" > "SNDCONT" > "WOW HD".For the operation method, refer to Control mode> (page 9).3 Select the WOW HD Control item to adjustTurn the Control knob or push it towards leftor right.Press the Control knob.Icon WOW HD Control Item"PRESET" Preset WOW HD"FRONT" >"FOCUS">"TruBass">"Space">"Center">"Defini"FOCUSTruBass FrontSRS 3D Space ControlSRS 3D Center ControlDefinition Front"REAR" >"TruBass">"Defini"TruBass RearDefinition Rear4 Adjust the WOW HD control itemTurn the Control knob or push it towards leftor right.Each time you push the knob, the setting alternatesbetween the settings shown in the table below.WOW HD Control Item RangePreset WOW HD Middle/ High/ User/ Through/ LowFOCUS OFF/ 1 — 9TruBass Front/TruBass RearOFF/ 1 — 9SRS 3D Space Control OFF/ 1 — 9SRS 3D Center Control -4 — Neutral — 4Definition Front/Definition RearOFF/ 1 — 9⁄• Preset WOW HD:FOCUS, TruBass, 3D Space Control, 3D Center Controland Definition are all set.• FOCUS: Adjusts the vertical position of the front speakerand sound image by virtual adjustment.• TruBass: Assists the playback for the super bass sound.• SRS 3D Space Control: Adjusts the soundscape.• SRS 3D Center Control:Adjusts the center image such as vocal part in music.• Definition:Improves sound quality in high range and creates clearsound.5 Exit WOW HD Control modePress the [FNC] button.⁄• To get the best sound, first go through Management system> (page 10).Memory modeStoring the values of DSP in memory.1 Adjust the item you wish to put in memoryBy referring to (page 10), (page 11), and (page 12), adjust the item youwish to put in the memory.2 Enter Memory modeUsing the Control knob, select "DSP" > "PRESET"> "MEMORY".For the operation method, refer to Control mode> (page 9).3 Select the number to put in the memoryTurn the Control knob.4 Determine whether to put the Audio Preset inthe memoryPress the Control knob."Memory?" is displayed.5 Put the Audio Preset in the memorySelect "YES" using the Control knob."Memory Completed" is displayed.6 Exit Memory modePress the [FNC] button.⁄• "Memory 1": When you press the Reset, all the sourceswill be the setting value which is registered.• "Memory 1", "Memory 2":The memory cannot be erased by the Reset button.• The following items cannot be registered.System Q Setting |
