|
English | 9Subwoofer OutputTurning the Subwoofer output ON or OFF.Push the Control knob toward down for at least2 seconds.Each time you push the knob, Subwoofer outputswitches ON and OFF.When it is ON, "SUBWOOFER ON" is displayed.In Audio file sourceSupreme SettingWhen AAC, MP3 or WMA files encoded at a lowbit rate (less than 128kbps (fs=44.1k, 48kHz)) areplayed, this function restores their high frequencyregion to approach the sound quality of equivalentsof these files encoded at a high bit rate. Processingis optimized for the compression format used (AAC,MP3, or WMA), and adjustment is made for the bitrate used.1 Enter Supreme Setting modeUsing the Control knob, select "DSP" > "SNDCONT" > "Supreme".For the operation method, refer to Control mode> (page 9).2 Select the SupremeTurn the Control knob or push it towards leftor right.Display Setting"Supreme ON" Plays sound using the Supreme function."Supreme OFF" Plays the original sound stored in the audio file.3 Exit Supreme Setting modePress the Control knob.⁄• The sound effect may be imperceptible dependingon the relationship between the audio file format andsetting.• This function is not available on iPod.Listening to the audio during a callPress the [SRC] button.The "CALL" display disappears and the audio systemcomes back ON.When the call endsHang up the phone.The "CALL" display disappears and the audio systemcomes back ON.⁄• To use the TEL Mute feature, you need to hook upthe MUTE wire to your telephone using a commercialtelephone accessory. Refer to Terminals> (page 41).Function Control modeTo set up various functions of this unit, select tree-structured function items.1 Enter Function Control modePress the [FNC] button.2 Select your desired setup itemSelect a setup item using the Control knob.Operation type OperationMovement between items Turn the Control knob.Selection of item Press the Control knob.Return to previous item Press the [FNC] button.Functions of items are as follows:Display Icon Function of setup item"Menu" "MENU" Allows you to set up the environment. Refer to"DSP" "DSP" Sets the DSP function. Refer to page 10 topage 14."DisplaySelect""DISPLAY" Allows you to set up the display. Refer to page14 to page 16."AngleAdjust""ANGLE" Allows you to set the panel angle. Refer to (page 18)."PresetMemory""P.MEMORY" Allows you to put stations in the memory.Refer to (page 20)."File Scan"etc."SCAN" etc. Allows you to set how to play the CD andaudio file. Refer to Audio file> (page 24)."Return" " " Returns to the previous item.3 Select an option for the selected itemRefer to the related pages for the operation ofeach option.4 Exit Function Control modePress the [FNC] button for at least 1 second.TEL MuteThe audio system automatically mutes when a callcomes in.When a call comes in"CALL" is displayed.The audio system pauses. PreviousNext |