Kenwood KDC-X9006U Instruction Manual

Also see for KDC-X9006U: Firmware update guide Service manual

32 | EnglishMenu systemIn Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"Beep : ON" Beep is heard."Beep : OFF" Beep canceled.In Standby modeManual Clock Adjustment1 Select Clock Adjustment modeTurn the Control knob.Select the "Clock Adjust" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Selecting the item (hours or minutes) to adjustPush the Control knob towards right or left.The items that are blinking are items that you canadjust.4 Adjust each itemTurn the Control knob or push it towards up ordown.5 Exit Clock adjustment modePress the [FNC] button.In Standby modeDate Adjustment1 Select Date Adjust modeTurn the Control knob.Select the "Date Adjust" display.2 Enter Date Adjust modePress the Control knob for at least 1 second.The date display blinks.3 Selecting the item (day, month, or year) toadjustPush the Control knob towards right or left.The items that are blinking are items that you canadjust.4 Adjust each itemTurn the Control knob or push it towards up ordown.5 Repeat step 3 and 4 operation and adjust thedate.6 Exit Date adjustment modePress the [FNC] button.In Standby modeDate ModeSetting the date format.1 Select Date ModeTurn the Control knob.Select the "Date Mode" display.2 Enter Date modePress the Control knob for at least 1 second.3 Select the date formatTurn the Control knob or push it towards up ordown.4 Exit Date modePress the [FNC] button.In Standby modeDSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI : ON" LED flashes."DSI : OFF" LED OFF.