Kenwood KDC-X9006U Instruction Manual

Also see for KDC-X9006U: Firmware update guide Service manual

20 | EnglishFrequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [FNC] and [ATT] buttons,press the [SRC] button.Release your fingers from the button after thedisplay appears.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.⁄• When the same operation is repeated, the frequencystep returns to the original setting.• When the frequency step is changed, the frequencies inthe memory are deleted.Preset TuningRecalling the stations in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Enter Preset Tuning Select modeTurn the Control knob.3 Select a desired station in the memoryTurn the Control knob.4 Recall the stationPress the Control knob.Cancelling Preset TuningPress the [FNC] button.Auto Memory EntryPutting stations with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPush the Control knob towards [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in thememory Auto Memory Entry closes.Station Preset MemoryPutting a station in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob towards [4] or [¢].3 Enter Preset Memory modeUsing the Control knob, select "P.MEMORY".For the operation method, refer to Control mode> (page 9).4 Select the number to put in the memoryTurn the Control knob.5 Determine the number to put in the memoryPress the Control knob.6 Allow the determined number to take effectPress the Control knob.Cancelling the Preset Memory modePress the [FNC] button.Function of remote controlDirect Access TuningEntering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.⁄• You can enter the FM band frequency in steps of aminimum of 0.1 MHz.Tuner/TV control features