Kenwood KDC-X9006U Instruction Manual

Also see for KDC-X9006U: Firmware update guide Service manual

26 | EnglishRecording & DownloadingAbout Internal MemoryAudio files can be stored in internal memory. Thestored audio files can be played in the same manneras CDs.Audio files can be stored by recording a music CD orcopying from a USB device.To play the stored audio file, refer to (USB/iPod/Internal Memory) control features> (page22).• Built-in flash memory512 MB• Max. recording time/ tracksApprox. 16 hours/ Approx. 240 tracks(Assuming that each tracks is in the 64 kbps WMAformat with playback time of about 4 min.)⁄ Notes on recording, copying, and erasing• Kenwood will not be responsible for the loss or damageto the music or sound data in case recording fails due tomachine fault or failure.• Audio files may be lost if the engine is started whilerecording or copying.• Record or copy with the engine running.• Do not press the reset button or remove the batterywhile recording, copying, or erasing. Otherwise, theaudio file in the internal memory may be lost.• The audio file in the internal memory cannot be copiedto another media.• Only the following controls can be used while recording,copying, or erasing:- Volume- Attenuator- Power offWhen recording or copying is interruptedIf ACC is turned off while recording or copying, ascreen to confirm whether to continue recordingor copying appears next time ACC is turned on(Resume function).1 When "Checking the condition..." is displayed,"Continue Ripping?" or "Continue USB Copy?" isalso displayed.2 Turn on the engine and then select "YES".3 Press the Control knob.Recording or copying resumes.FNCControl knobFunction iconMemory size