| 
English | 23⁄• For the audio files that can be played with this unit andthe devices that can be connected to this unit, refer to (page 5).• The word "iPod" appearing in this manual indicates theiPod connected with the KCA-iP200 (optional accessory).Refer to (page 5).• If you start playback after connecting the iPod, the musicthat has been played by the iPod is played first.In this case, "RESUMING" is displayed without displayinga folder name, etc. Changing the browse item willdisplay a correct title, etc.• When the iPod is connected to this unit, "KENWOOD" or"✓" is displayed on the iPod to indicate that you cannotoperate the iPod.• When the USB device is connected to this unit, it can becharged up provided that this unit is powered.• When the Multi Card Reader is used, refer to Search> (page 23).• After you stopped playing a file contained in the USBdevice, you can restart playing the file from the pointwhere you stopped its playback.Even after removing the USB device, you can restartplaying the file from the point where you stopped itsplayback as long as the files contained in the USB deviceare all the same.• Be sure to insert the USB device connector as far as it willgo.Removing the USB device1 Set the remove mode as the USB sourcePress the [0] button for at least 2 seconds."USB REMOVE" display blinks.2 Remove the USB device.Playing Internal MemoryPress the [SRC] button.Select the "Internal Memory" display.Refer to (page 7).Playing External DiscPlaying discs set in the optional accessory discplayer connected to this unit.Press the [SRC] button.Select the display for the disc player you want.Refer to (page 7).Display examples:Display Disc player"CD Changer" CD changer"MD Changer" MD changer⁄• The functions that can be used and the information thatcan be displayed will differ depending on the externaldisc players being connected.Drive SearchSelecting the device inserted in the Multi CardReader.1 Put the playback to pausePress the Control knob.2 Select a devicePush the Control knob towards up or down.3 Restart playbackPress the Control knob.⁄• This unit is compliant with Multi Card Readers with amaximum of 4 slots.• If a device is inserted during connection of the MultiCard Reader, it is not recognized. Select the Removemode with reference to (page 22), remove the Card Reader, and then insert thememory.Pause and playPress the Control knob.Each time you press the knob, the audio pauses orplays. |
