English | 37In Standby modeFirmware version displayDisplaying the firmware version with the unit.Turn the Control knob.Select the "F/W Version : " display.In Internal Memory sourceInternal Memory FormatPerform format to delete all audio files stored ininternal memory.ڥ The content of formatted memory cannot be restored.Be careful when formatting.1 Enter Internal MemoryPress the [SRC] button.Select the "Internal Memory" display.2 Enter Menu modeUsing the Control knob, select "MENU".For the operation method, refer to Control mode> (page 9).3 Select the Internal Memory FormatTurn the Control knob.Select the "INT.MEM.Format" display.4 Enter the Formatting modePress the Control knob for at least 1 second."Format?" is displayed.5 Start formatSelect "YES" using the Control knob."Format..." display blinks.When the formatting finishes, "Completed" isdisplayed.6 Exit Formatting modePress the [FNC] button.In Standby modeDemonstration mode settingSets the demonstration mode.1 Select the Demonstration modeTurn the Control knob.Select the "DEMO Mode" display.2 Set the Demonstration modePress the Control knob for at least 2 seconds.Each time you press the knob at least 2 seconds,the Demonstration mode alternates between thesettings shown in the table below.Display Setting"DEMO Mode : ON" The Demonstration mode function is ON."DEMO Mode : OFF" Exit Demonstration mode (Normal mode).