English | 31In Standby modeSecurity CodeActivating the Security Code disables the usageof audio unit by someone else. Once the SecurityCode is activated, the entry of authorized SecurityCode is required to turn on the audio unit when it isremoved from the vehicle. Indication of this SecurityCode activation prevents your precious audio unitfrom stealing.⁄• When you activate the Security Code function, it cannot bereleased.Note, your Security Code is the 4 digit number entered inyour "Car Audio Passport" in this package.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.Refer to (page 7).2 Enter Menu modeUsing the Control knob, select "MENU".For the operation method, refer to Control mode> (page 9)."Security Set" is displayed.3 Enter Security Code modePress the Control knob for at least 1 second.When "Enter" is displayed, "SECURITY SET" is alsodisplayed.4 Select the digits to enterPush the Control knob towards right or left.5 Select the Security Code numbersTurn the Control knob or push it towards up ordown.6 Repeat steps 4 and 5, and complete theSecurity Code.7 Confirm the Security CodePress the Control knob for at least 3 seconds.When "Re-Enter" is displayed, "SECURITY SET" is alsodisplayed.8 Do the step 4 through 7 step operation, andreenter the security code."Approved" is displayed.The Security Code function activates.⁄• If you enter a Code different from your Security Code,you have to start over from step 4.9 Exit Security Code modePress the [FNC] button.Resetting the Security Code function when theaudio unit is first used after removed from thebattery power source or the Reset button ispressed1 Turn the power ON.2 Do the step 4 through 7 step operation, andreenter the security code."Approved" is displayed.Now, you can use the unit.⁄• If an incorrect code is entered, "Waiting" is displayed, andthe input prohibition periods shown in the table belowis generated.After the input prohibition time lapses, "SECURITY" isdisplayed, and you can reenter the code.Number of times theincorrect code was inputInput prohibited time1 —2 5 minutes3 1 hour4 24 hoursIn Standby modeSource Select ModeSetting up the Source Select mode.Display Setting"SRC Select : 1" Displays source icons for your choice."SRC Select : 2" Allows you to select sources one after another.In USB mode with iPod connectediPod mode settingSetting up the iPod operation method in File Select.Display Setting"iPod Mode : ON" Uses the operation method similar to that ofiPod."iPod Mode : OFF" Uses the operation method different from thatof iPod.
