Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

27 ENNormal playbackAdjusting the soundLOUDNESSTONE BASS BOOSTTONEVOLUMECONTROLMUTEA SPEAKERS BSPEAKER EQ ACTIVE EQPHONESMULTICONTROLVOLUME /POWERSPEAKER EQACTIVE EQMUTEJoystick(MULTI CONTROL 5 / ∞,DOWN 2 / UP3)Adjusting the TONEYou can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode and when “THX OFF”.1 Press the TONE key to select the TONE mode.2 Use the MULTI CONTROL knob or Joystick (5/∞) to select TONEON/OFF.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFE3 When in TONE ON selection, press the TONE key for the followingdisplays.BASS : Select this to adjust the low frequency range.TREBLE : Select this to adjust the high frequency range.4 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust thesound quality.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFE• The bass and treble levels are adjustable from -10 to +10 in 2 stepincrements.• The adjustment item is displayed for approximately 8 seconds.Once-touch low frequency emphasis (BASS BOOST)(remote control only)You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo modes and when “THX OFF”.Press the BASS BOOST key.• Press the key once to select the maximum (+10) low frequencyemphasis setting.• This key does not function when the receiver is in the sound qualityor ambience effects adjustment mode.Switching back to the previous settingPress the BASS BOOST key again.Adjusting the LOUDNESS mode (remote control only)You can adjust the Loudness function which controls the low volumesettings to maintain the music's richness. The adjustment can be madewhen the receiver is in the PCM stereo and analog stereo mode andwhen “THX OFF”.Press the LOUDNESS key to turn the LOUDNESS setting ON.To cancelPress the LOUDNESS key again so that the “LOUDNESS”indicator goes off.Muting the soundThe MUTE key lets you mute the sound of the speakers.Press the MUTE key.LSL S SB SRC RMUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODE DB CLIPAUTO DETECTSWLFESPABlinksTo cancelPress the MUTE key again so that the “MUTE” indicator goes off.• MUTE ON can also be deactivated by turning the VOLUMECONTROL knob or pressing VOLUME +/– keys.