Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

38 ENAmbience effectsConvenient functionsMULTI CONTROLDIMMERSTEREOSOUND LISTEN MODESOUNDLISTEN MODE %/ fiSTEREOJoystick(MULTI CONTROL 5 / ∞,DOWN 2 / UP3)DIMMERAdjusting the soundYou can make further adjustments to the sound while listening toplayback in the surround mode.1 Press the SOUND key and then use to the MMMMM/????? keys or joystick(2/3) until the desired item appears in the display.Each time you press the MMMMM/????? keys or Joystick (2/3), the menuchanges as follows:Note that some items are not displayed in certain modes.1 CNTR (Center speaker level adjustment)*2 SR (Right surround speaker level adjustment)*3 SBR (Surround back right speaker level adjustment)*4 SBL (Surround back left speaker level adjustment)*5 SL (Left surround speaker level adjustment)*6 SUBW (Subwoofer level adjustment)*7 INPUT (Input level adjustment - analog mode only) §8 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital mode only)9 PANORAMA (Panorama mode ON/OFF )**0 DIMENSION (Dimension adjustment)**- CENTER WIDTH (Center width adjustment)**= CENTER FOCUS (Center focus adjustment)***~ CSII DLY (Rear speaker delay adjustment)***! CSII GAIN (Input gain adjustment)***@ TruBass (Trubass adjustment)**** The adjustment is only temporary for the current input selection.The value will return automatically to the original setup value whenthe power is turned on/off or when the input selection is changed.** Pro Logic II Music mode only.*** CS II mode only.2 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust thesetting as desired.• The adjustment item is displayed for approximately 8 seconds.Midnight mode (Dolby Digital mode only)When watching movies at night , you might not be able to raise thevolume as loud as normal. Midnight mode compresses the dynamicrange of previously specified parts of the Dolby Digital sound track (likescenes with sudden increases in volume) to minimize the difference involume between the specified and non-specified parts. This makes iteasy to hear all of the sound track, even when listening at low volumes.1 Press the SOUND key, then press the MMMMM/????? keys or Joystick (2/3)until “MIDNIGHT” appears on the display.• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3 isselected as the source and the listen mode is set to “DOLBY DIGITAL.”2 Use the MULTI CONTROL knob or Joystick (5/∞) to select theON or OFF setting.PRO LOGICLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETESTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXDOLBY DIGITAL• The adjustment item is displayed for approximately 8 seconds.• Some Dolby Digital software may not be compatible with theMidnight mode.Panorama mode (Pro Logic IIMusic mode only)When listening to music, you will be able to enjoy the “wraparound”sound effect when you adjust the panorama mode.1 Press the SOUND key, then press the MMMMM/????? keys or Joystick (2/3)until “PANORAMA” appears on the display.2 Use the MULTI CONTROL knob or Joystick (5/∞) to selectPANORAMA ON or OFF.1 PANORAMA ON : PANORAMA mode is ON.2 PANORAMA OFF : PANORAMA mode is OFF.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETESTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXPRO LOGICDOLBY DIGITAL