Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

50 ENSpecificationsFor the U.S.A and CanadaAUDIO section (VR-6070)Rated power output during STEREO operationEffective power output during SURROUND operationFRONT (20 Hz ~ 20 kHz, 0.09% T.H.D. at 8 Ω one channel driven)............................................................................... 100 W + 100 WCENTER (20 Hz ~ 20 kHz, 0.09% T.H.D. at 8 Ω one channeldriven) .................................................................................. 100 WSURROUND (20 Hz ~ 20 kHz, 0.7% T.H.D. at 8 Ω one channeldriven) ................................................................... 100 W + 100 WSURROUND BACK/SUBWOOFER (20 Hz ~ 20 kHz, 0.09%T.H.D. at 8 Ω one channel driven) ..................................... 100 WTotal harmonic distortion ........................ 0.009% (1 kHz, 50 W, 8 Ω)Frequency responseLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)................................................. 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dBPHONO 'RIAA' response .............. 40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dBMaximum input levelPHONO (MM) ..................................... 45 mV, 1% T.H.D. at 1 kHzSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 75 dBLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)............................................................................................... 95 dBLoudness controlVOLUME at –30 dB level ...................................... +6 dB (100 Hz)Input sensitivity / impedancePHONO (MM) ........................................................ 4.0 mV / 47 kΩLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH).............................................................................. 320 mV / 47 kΩOutput level / impedanceTAPE REC ............................................................... 320 mV / 1 kΩPRE OUT (FRONT,CENTER,SURROUND) ................. 1 V / 500 ΩPRE OUT (SURROUND BACK) ................................... 1 V / 500 ΩPRE OUT (SUBWOOFER) .......................................... 1 V / 500 ΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)For other countries (except for the U.K.)AUDIO section (KRF-X9060D)Effective power output during STEREO operation1 kHz, 10 %, 8 Ω ......................................................... 130 W + 130 WRated power output during STEREO operationEffective power output during SURROUND operationFRONT (1 kHz, 10 % T.H.D. at 8 Ω one channel driven)............................................................................... 130 W + 130 WCENTER (1 kHz, 10 % T.H.D. at 8 Ω one channel driven).............................................................................................. 130 WSURROUND (1 kHz, 10 % T.H.D. at 8 Ω one channel driven)............................................................................... 130 W + 130 WSURROUND BACK/SUBWOOFER (1 kHz, 10 % T.H.D. at 8 Ωone channel driven) ............................................................ 130 WTotal harmonic distortion ........................ 0.009% (1 kHz, 50 W, 8 Ω)Frequency responseLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)................................................. 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dBPHONO ‘RIAA’ response ................ 40 Hz ~ 20 kHz, 1.5 dB ~ –3.0 dBMaximum input levelPHONO (MM) .................................... 45 mV, 1 % T.H.D. at 1 kHzSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 75 dBLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)............................................................................................... 95 dBLoudness controlVOLUME at –30 dB level ...................................... +6 dB (100 Hz)Input sensitivity / impedancePHONO (MM) ........................................................ 4.0 mV / 47 kΩLine (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH).............................................................................. 320 mV / 47 kΩOutput level / impedanceTAPE REC ............................................................... 320 mV / 1 kΩPRE OUT (FRONT,CENTER,SURROUND) ................. 1 V / 500 ΩPRE OUT (SURROUND BACK) ................................... 1 V / 500 ΩPRE OUT (SUBWOOFER) .......................................... 1 V / 500 ΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –24 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩOutput level / impedance / wave lengthOptical ........................... (–21 dBm ~ –15 dBm), 660 nm ±30 nmVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩS VIDEO inputs /outputsS VIDEO (luminance signal) ................................... 1 Vp-p / 75 ΩS VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 ΩCOMPONENT VIDEO inputs /outputsCOMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/CR-signal) ............. ±0.32 Vp-p / 75 ΩFM tuner sectionTuning frequency range ..................................... 87.5 MHz ~ 108 MHzUsable sensitivity (MONO)VR-6070................... 1.3 μV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)KRF-X9060D................... 1.6 μV (75 Ω)/ 15.2 dBf (75 kHz dev, SINAD 30 dB)50 dB quieting sensitivitySTEREO ..................................................... 28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortionMONO (1 kHz, 75 kHz dev) .......................... 0.5% (65 dBf input)STEREO (1 kHz, 67.5 + 6.75 kHz dev) ......... 0.7% (65 dBf input)Signal to noise ratioMONO (1 kHz, 75 kHz dev) ........................ 75 dB (65 dBf input)STEREO (1 kHz, 67.5 + 6.75 kHz dev) ....... 68 dB (65 dBf input)Stereo separation (1 kHz) ........................................................... 40 dBSelectivity (±400 kHz) (VR-6070) ............................................... 70 dB(KRF-X9060D) ......................................... 50 dBFrequency response (30 Hz ~ 15kHz) ..................... +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range10 kHz step ................................ 530 kHz ~ 1,700 kHz (VR-6070)10 kHz step ......................... 530 kHz ~ 1,610 kHz (KRF-X9060D)9 kHz step ........................... 531 kHz ~ 1,602 kHz (KRF-X9060D)Usable sensitivity (30% mod, S/N 20 dB) ......... 16 μV / (600 μV/m)Signal to noise ratio (30% mod, 400 Hz).......................................................... 50 dB (60 dBμ VEMF input)GENERALPower consumption VR-6070 ....................................................... 3 AKRF-X9060D ........................................... 300 WAC outletSWITCHED VR-6070 ..................... (total 150 W, 1.25 A max.)KRF-X9060D ............................. (total 90 W max.)Dimensions ..................................................... W : 440 mm (17-5/16")H : 159 mm (6-1/4")D : 392 mm (15-7/16")Weight (Net)VR-6070 ................................................................ 9.4 kg (20.7 lb)KRF-X9060D ........................................................ 10.0 kg (22.0 lb)Caution : Read this page carefully to ensure safeoperation.100 watts per channel minimum RMS, both channels driven,at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% totalharmonic distortion. (FTC)100 watts per channel minimum RMS, both channels driven,at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% totalharmonic distortion. (FTC)

/ 52

Related manuals for Kenwood KRF-X9060D