Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

40 ENTruBass adjustment mode (CS IImode only)TruBass adjustment provides deep, rich bass sound to various speakers.1 Press the SOUND key, then press the MMMMM/????? keys or Joystick (2/3)until “TruBass” appears.2 Use the MULTI CONTROL knob or Joystick (5/∞) to select thefollowing;1 TruBass OFF2 TruBass SW3 TruBass LR4 TruBass SW + LR• After selecting 2, 3 or 4, TruBass speaker size and level adjustmentselection will be available.3 For TruBass speaker selection, use the MULTI CONTROL knobor Joystick (5/∞) to select any of the following display;1 TruBass LARGE2 TruBass MID3 TruBass SMALL4 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust theTruBass Level.• The adjustment range is from 0 (TruBass OFF) to 10.LSL SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXSWLFEDisplay dimmer adjustmentThe dimmer function lets you select the brightness of the receiver'sdisplay. You might find this useful if you darken your room to watchmovies or listen to music.Each time you press the DIMMER key, the display’s brightnesschanges among the three available settings.Select the brightness level you find most pleasing.1 Bright2 Medium3 Dark96kHz LPCM playbackThe receiver is compatible with the 96kHz LPCM playback. To play a96kHz DVD, set the listen mode to “STEREO”.• In FULL AUTO input mode, the listen mode will automatically beSTEREO.• When in DIGITAL MANUAL input mode (listen mode is not STEREO),“FS 96kHz” will appear in the display and no sound can be heard fromthe speakers.Press the LISTEN MODE key (the listen mode changes to the STEREOmode) to output sound from the speakers.Ambience effects