Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

31 ENListening to radio broadcastsProceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).3Use the MULTI CONTROL knob or Joystick (5/∞) to selectone of the station presets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.Receiving preset stationsTUNERNumeric keys1Press the TUNER key to select tuner as the source.2Enter the number of the preset station you want to receive (upto “40”).Press the numeric keys in the following order:For “15”, press 0,5For “20”, press 0,0,)• If you make a mistake entering a two digit number, press the +10key repeatedly to return to the original display and start again.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXReceiving preset stations in order (P.CALL)Joystick(P.CALL 4/¢)TUNER1Press the TUNER key to select the tuner as the source.2Use the Joystick to adjust the P.CALL 4/ ¢direction toselect the desired station.• Each time you push the Joystick, another preset station is receivedin order.Pushing the Joystick to P.CALL ¢ does the following:Pushing the Joystick to P.CALL 4 does the following:Holding the Joystick on ¢ or 4 direction, lets you skip throughthe presets, receiving each preset station at 0.5 second intervals.(For the U.K. only)Using the RDS DISP (Display) keyTUNERRDS DISPPressing the RDS DISP key changes the contents of thedisplay.Each press switches the display mode as follows :1 PS (Program Service name) display2 RT (Radio Text) display3 Frequency display1 PS (Program Service name) display :The station name is displayed automatically when an RDSbroadcast is received.If no PS data was sent, “NO PS” is displayed.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX2 RT (Radio Text) display :Text data accompanying the RDS broadcast scrolls across thedisplay. “NO RT” is displayed if the current RDS station does notprovide RT data.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX3 Frequency display :Displays the frequency of the current station.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX