Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

32 EN(For the U.K. only)Presetting RDS stations(RDS AUTO MEMORY)This function automatically stores up to 40 RDS stations in the presetmemory. In order to use the PTY function, the RDS stations must bestored in the preset memory using the RDS Auto Memory function.TUNER MULTI CONTROLMEMORYBAND1Press the TUNER key to enter tuner mode.2Use the BAND key to set the broadcast band to “FM”.3Press the MEMORY key continously for more than 3seconds will start AUTO MEMORY.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX• After a few minutes, up to 40 RDS stations are preset in order fromchannel “01”.• Stations already stored in the preset memory may be replaced byRDS stations. (i.e., If the RDS AUTO MEMORY function detects 15RDS stations, the stations currently preset at numbers 01~15 willbe replaced by the RDS stations.)(For the U.K. only)Tuning by Program TYpe (PTY search)This function lets you set the tuner to automatically search for stationswhich are currently broadcasting the type of program (genre) you wantto listen to.Under certain receiving conditions, it may take more than 1minute to complete the search.Joystick(MULTI CONTROL 5 / ∞,DOWN 2 / UP3)TUNING1/¡PTYPreparations• Execute the RDS auto memory procedure.• Set the broadcast band to FM.• Tune to an RDS station.1Press the PTY key to activate the PTY search mode.Light upLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX PTYWhen an RDS broadcast is received, the program type is shown onthe display. If no PTY data is available, or if the station is not an RDSstation, “NONE” is displayed.2While the “PTY” indicator is lit, use the Joystick (5/ ∞) orTUNING 1/ ¡keys to select the program type of yourchoice.Program type tableProgram Type Name Display Program Type Name DisplayPop Music POP M Weather WEATHERRock Music ROCK M Finance FINANCEEasy Music EASY M Children’s Program CHILDRENLight Classical Music LIGHT M Social Affairs SOCIALSerious Classical Music CLASSICS Religion RELIGIONOther Music OTHER M Phone In PHONE INNews NEWS Travel TRAVELCurrent Affairs AFFAIRS Leisure LEISUREInformation INFO Jazz Music JAZZSport SPORT Country Music COUNTRYEducation EDUCATE National Music NATION MDrama DRAMA Oldies Music OLDIESCulture CULTURE Folk Music FOLK MScience SCIENCE Documentary DOCUMENTVaried Speech VARIED“NO PROGRAM” is displayed if this operation is attemptedbefore performing the RDS Auto Memory operation.3Press the PTY key to start searching.EXAMPLE : Searching for a Pop Music broadcast.Display while searching. BlinksLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX PTYProgram type name displayDisplay when a station is received. Goes outRDSLSL S SB SRC RSWLFEDOLBY DIGITALPRO LOGICSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETESTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORTYMEMOSTEREOTUNEDSurround EXStation name display• No sound is heard while “PTY” is blinking.• If the desired program type cannot be found, “NO PROGRAM” isdisplayed, then after several seconds the display returns to theoriginal display.To select another program type.Repeat steps 1, 2 and 3.Listening to radio broadcasts