Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

42 ENBasic remote control operations for other componentsOperating other componentsThis operation lets you operate the registered components.KENWOOD audio components with system control turn on and offautomatically with the receiver via the system control connections.SOURCERECEIVERINPUTSELECTOR1Use the INPUT SELECTOR keys to select the component youdesire.• Pressing the INPUT SELECTOR keys also changes the input selectoron the receiver.• When you operate your registered DVD player, CD player, Cabletuner, DSS/SAT receiver, VCR or TV, go to step 2.• When you operate the CD player, Cassette deck, MD player, orTuner with system control connection, go to step 3.2Press the SOURCE key.• To return to the receiver operation mode, press the RECEIVER key.3Press the operation keys you desire. yThe remote control mode remains at the selected input. If youwish to operate another component, repeat step 2 or 3.NoteBe sure to point the remote control at the remote sensor on thereceiver when you want to operate KENWOOD components connectedby system control cords. Otherwise, point the remote control at thecomponent you want to operate.Storing the remote control code of the othercomponentsThe remote control unit can store the remote control code of the othercomponents and you can operate the other components from the remotecontrol unit. The remote control code is stored on the key or memory ofthe remote control unit.Storing on the keyYou can store the remote control code to the key as shown below:P.CALL4 /DOWNP.CALL/UP ¢TUNING+TOP MENUSET UP MENUSOUNDTV CONTROLVOL.VOLUME+- - INPUTSEL+-CHDVDVCRCBLTVDSS/SATOTHERSRECEIVERSOURCE POWERACTIVE EQOSD RETURNDISC SEL DISC SKIPFLIP BANDINPUT SEL A/B AUTO 8DVD/6CH CD/DVD PHONO TUNERVIDEO 1 VIDEO 2 MD/TAPEMUTEDVDENTERINPUT SELECTORMULTICONTROL¢41 ¡ 2 67 DIMMER™ £™147+102580369+100REMOTE MODELISTEN MODEDSP MODESTEREOINPUT MODESPEAKER EQ™VIDEO 3PAGELEARNTHXDISC SKIPDISC SELSOURCE1 Rewind¡ Fast forwardNumeric keysCH + / –Skip ¢/4OSDPAGE fi/%RETURNTOP MENU3/8 (Play/Pause)2 Flip8 Pause7 StopCursor 5/∞/2/3ENTERMENULEARN key1 Point the infrared ray system part of another remote control unitto the remote sensor of the remote control unit.2 Press the LEARN key.• This remote control is ready to receive the remote control code fromthe other source.LEARN3 Press any of the REMOTE MODE (DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR, TV, OTHERS) keys to select the input of the desiredremote control unit.4 Press the desired key of the remote control unit.LEARN5 From the remote control unit of the other source, press the keythat you want to store.• The remote control code is sent to the remote control unit.• “OK” appears when finished.LEARN• When the appropriate code is not properly stored, “AGAIN” will bedisplayed. Repeat from step 2 onwards.LEARN• If the code cannot be stored after a few attempts, “ERROR" willappear. Repeat from step 2 onwards.• If LEARN mode‘s storage is full, “FULL" appears on the display.6 The remote control code is stored on the key of this remotecontrol unit.7 Press the LEARN key again to exit the learning mode.Remote controlunit of the othersource.Infrared ray system part