Kenwood KRF-X9060D Instruction Manual

Also see for KRF-X9060D: Service manual Service manual Instruction manual

Contents

6 ENNames and functions of parts1 POWER ON/OFF key(For KRF-X9060D) £Use to turn the main power ON/OFF.2 ON/STANDBY key(For KRF-X9060D) £Use to turn the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator2 POWER ON/STANDBY key(For VR-6070) £Use to turn the power ON/STANDBY.STANDBY indicator3 A SPEAKERS B keys §Use to turn the A/B speakers ON/OFF.4 THX key flUse to switch the status of THX.5 SPEAKER EQ key ¶Use to select SPEAKER EQ’s setting.6 Surround indicatorsTHX indicator ‡Lights when the receiver is in the THX mode.SPEAKER EQ indicator •Lights when the receiver is in the SPEAKEREQ mode.ACTIVE EQ indicator •Lights when the receiver is in the ACTIVE EQmode.DOLBY DIGITAL indicator flLights when the receiver is in the DolbyDigital mode.Main unit^ SOUND key °Use to adjust the sound quality and the ambi-ence effects.& BAND key ºUse to select the broadcast band.* AUTO key ºUse to select the auto or manual tuningmode.( TONE key ¶Use to switch the status of TONE control.) MEMORY key ºUse to store radio stations in the presetmemory.¡ SETUP key £Use to select the speakers' settings etc.™ MMMMM/????? keys £Use for selection adjustments during SOUND,SETUP and PRESET CHANNEL functions.£ MULTI CONTROL knob £Use to control a variety of settings.¢ LISTEN MODE knob flUse to select the listening mode.∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)jacks )§ AV AUX key )Use to switch the input to AV AUX.DTS indicator flLights when the receiver is in the DTS mode.CS q indicator flLights when the receiver is in the CIRCLESURROUND II mode.7 ACTIVE EQ key ¶Use to select ACTIVE EQ’s setting.8 DSP key flUse to select any of the DSP mode.9 STEREO key °Use to switch the listen mode to STEREO.0 INPUT MODE key 9Use to switch between the full auto, digitaland analog inputs.! DIMMER keyUse to select the REC MODE. ªUse to adjust the brightness of the display.‚@ VOLUME CONTROL knob §# MUTE key ¶Use to temporarily mute the sound.$ PHONES jack •Use for headphone listening.% Input Selector keys §(DVD/6CH, CD/DVD, PHONO, TUNER,VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)Use to select input sources.Standby modeWhile the standby indicator is lit, a small amount of power is suppliedto the system to back up the memory. This is called standby mode.Under the condition, the system can be turned ON by remote controlunit.Connection at POWER ON/OFF key (for KRF-X9060D)The power in this equipment will not be completely cut off from the ACwall outlet when the main switch is turned OFF.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfs DSP MODEDTSMATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CS IIA B CLIPAUTO DETECT THXAUTORDSPTYMEMORYSTEREOTUNEDSWLFETHX SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMERSOUND TONE SETUPBAND AUTO MEMORYMULTI CONTROL LISTEN MODETUNERMD/TAPEVIDEO 3VIDEO 2VIDEO 1PHONOCD/DVDTHXDTSCS IIDOLBY DIGITALSPEAKER EQACTIVE EQSTANDBYON/STANDBYA SPEAKERS BPOWERPHONESDOWNMUTEAV AUXS VIDEO VIDEO L-AUDIO-RUPVOLUME CONTROLDVD/6CH-ON –OFFSurround EXSTANDBYPOWERON/STANDBYDisplaySpeaker selection indicatorsInput channel indicatorsOutput channel indicatorsAUTO indicatorMEMORY indicatorSTEREO indicatorTUNED indicatorFrequency displayInput displayPreset channel displaySurround mode displaySpeakerindicators MUTEindicator CLIPindicator Input modeindicators Listen modeindicators RDS indicators(For VR-6070)