Kenwood TH-22A Instruction Manual

Also see for TH-22A: Instruction manual Instruction manual Instruction manual Instruction manual Service manual

From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document LibraryRECEIVING1 Tune to the prearranged frequency.2 Press [F], [1) to switch ON Page.• "PAG" appears.You are ready to receive a call addressed with yourstation code or a group code. If no signal is received formore than 2 seconds after a Page has opened thesquelch, the squelch then closes.• Receiving a Call with your Station CodeWhen a signal is received encoded with your individualcode, the squelch opens and you hear an alert tonefrom the speaker. In addition, the display shows "OP"and the calling station's code.APO sPress [PTT] while "PAG" is blinking to respond to thecalling party.• Receiving a Call with a Group CodeWhen a signal is received encoded with the correctgroup code, the squelch opens and you hear an alerttone from the speaker. In addition, the diisplay showsthe received group code and in which mE1mory (1 to 6)that group code has been stored.---3p'-. ,_ ,_-· _,__,APO sPress [PTT] while "PAG" is blinking to respond to thecalling party.Note:~ "En appears on the display if your tranSC!liver fails toreceive the Page code correctly.~ The microphone is inhibited while the Page code istransmitted.~ It's advisatJie to turn OFF Battery Saver when you usePage.45