Kenwood TH-22A Instruction Manual

Also see for TH-22A: Instruction manual Instruction manual Instruction manual Instruction manual Service manual

From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document LibraryPAGE CODE AND REPEATERSPressing [PTT] transmits the Page code after a shortdelay. This delay helps avoid losing Page data whenusing repeaters with long response times that may missreceiving a portion of the Page code.The delay time is 350 ms during simplex operation.When using transmit offset or split operation, you canchange 350 ms (default) to 550 ms.1 Press [CALL]+ POWER ON to enter Menu Set-up.2 Turn the ENC/SQL control to select Menu No. 08.• The current delay time is displayed.-.. --..J l -· ,_ '.4;1 c _, _, ,_, "BU'APO s3 Press [CALL] to select "350" or "550".4 Press any key other than [CALL], [LAMP], or [MONI]to exit Menu Set-up.46LOCKING-OUT CODESThe following explains how to inhibit the transceiver fromreceiving specific Page codes. Although the codes arelocked-out from the receiver, the transmitter stilltransmits a Page on the locked out channels.1 Press [F), [1].• "PAG" appears.2 Press [ F] (1 s ), [ 1] to select Cod.e Select.3 Turn the ENC/SQL control to display the Page codeto be locked-out.4 Press [F) (1 s), [LAMP].• A"*" icon on the display indicates the Page codeis locked-out.APO-o-,-,-,5·· , , , * s• Each time this key combination is pressed, theselected Page code is locked-out and unlockedalternately.Note: You cannot lock-out memory 0 that stores the callingstation's code.