Kenwood TH-22A Instruction Manual

Also see for TH-22A: Instruction manual Instruction manual Instruction manual Instruction manual Service manual

From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document LibraryINSTALLING THE SPEAKER-MICJACKSTRAIN RELIEFWhen using the SMC-31, SMC-32, SMC-33, or SMC-34options, you should install the cable tie supplied with thetransceiver to act as a strain relief for the option cable.1 Remove the speaker-microphone jack protector capand the transceiver handle.• Store the items in a safe place for use when youremove your option.2 Plug the option connector into the speaker-microphone jack.3 Wrap the cable tie around the option cableapproximately 4 to 5 em from the option connector.Insert the cable tie end into its clasp and pull the cabletie end until the tie is snugly holding the option cable.• The tie end should be pointing away from the sideof the transceiver.4 Cut off the end ofthecable tie.• If you plan to remove the tie and re-use it againlater, do notcutthe tie flush with the clasp. Leaveat least 1 or 2 em protruding through the clasp.• Removing the cable tie is done by inserting a wire,such as a paper clip, into the latching tab in thecable tie clasp while pushing the cable tie end outof the clasp.5 Insert the support stud on the cable tie into the handleloop on the side of the transceiver. Press in securely.61