6 Magellan MAP 410 GPS ReceiverBattery InstallationThe MAP 410 uses four AA alkaline batteries that are installed from thebottom of the receiver. Use the rings to unscrew the water seal battery caps.Insert the batteries into the battery tubes, with the positive end first, twobatteries in each side, and screw the battery caps until securely closed.Although it is recommended that four AA batteries be used, in case of anemergency the receiver will operate with only two batteries if both areinserted into one of the battery tubes.If the batteries are left out of the receiver for more than 30 minutes, yourreceiver may need to be reinitialized.+++ +----ZOOMZOOMMAP 410
