5-22 Installing the Operating System with Express SetupNetwork DriverSpecify the details of network driver.Two standard network drivers that are mounted will be installed automatically, but the link speedand Duplex mode need to be specified manually.When PROSet is not installed1. Open the [Device Manager]2. Double-click [(Network Adapter Name)] in the list.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK].When PROSet is installed1. Open the [Device Manager]2. Double-click [(Network Adapter Name)] in the list.3. Click the [Link Speed] and specify the [Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK].Specify the other network driver with the same progress above.Also, add or delete any protocols and services if necessary.You can operate the process on the property dialog box for local area network which can beappeared from [Network and Dial-up Connection].NOTE: We recommend you to add [Network Monitor] at [AddingServices]. [Network Monitor] can monitor the frame (or the packet)that the computer installing [Network Monitor] sends or receives. Thistool is valuable when analyzing network trouble. For information onhow to install the tool, see the "Setting for Solving Problems"described later in this chapter.
