General Description 2-7Rear ViewSee Chapter 8 for detail information on LED indication.1 PCI Express slot (#1 to #7 from left)Slots 1 and 2: Hot-plug PCI Express (x8)Slots 3 and 4: Non-hot-plug PCI Express (x8)Slots 5, 6, and 7: Non-hot-plug PCI Express (x4) (Can contain x8 board.)2 Keyboard connectorUsed to connect with the optional keyboard.3 Mouse connectorUsed to connect with the optional mouse.4 Management LAN portUpper LED: LINK/ACT LED Lower LED: 100/10 LED5 LAN connectorUsed to connect with a network system on LAN. The last digit represents the port number.Enabling [Shared BMC LAN] in BIOS SETUP allows port 3 to be used for management LAN aswell as the standard LAN. However, the network performance may be reduced because thedata of both LANs must be transmitted or received (see Chapter 4).6 1000/100/10 LED7 UID (Unit ID) LED8 UID (Unit ID) switch9 AC inletUsed to connect with the power cord of the server. To use 200 to 240 VAC power, setting mustbe changed.10 LINK/ACT LED11 Power supply unit LED12 Power supply unitThe power supply unit supplies DC powers to the server. The last digit represents slot number.13 Serial port B connectorThe serial port B connector is connected with a device having the serial interface.The server cannot directly be connected to a leased line through the connector.14 Monitor connectorUsed to connect with the display unit.15 Rear USB1 (top), Rear USB2 (bottom) connectorsUsed to connect with devices accepting the USB 2.0 interface (Hi-speed).1 2 3 4 5-4 5-3 5-15-267891011-1 11-2 11-312-2911-1 11-2 11-312-1131415
