2-6 General DescriptionFront View (Switches and LEDs)See Chapter 8 for detail information on LED indication.IDID1 21 RESET switchPress this switch to reset the server.2 DISK Access LED3 LAN1/2 access LED4 LAN3/4 access LED5 STATUS LED6 POWER/SLEEP LED7 UID (Unit ID) LED8 UID (Unit ID) switchUse this switch to turn on or off the ID LED located on the front and rear panels of the server.Pressing this switch once turns on the UID LED, and pressing again turns off.9 POWER/SLEEP switchUse this switch to power on/off the server. If you press the switch once, then thePOWER/SLEEP LED goes on and the power is turned on. If you press the switch again, thepower is turned off. The system is forcibly shut down when the power switch is pressedcontinuously for four seconds or longer.When the sleep feature is enabled, pressing this switch once places the server in sleep (powersaving) mode. Pressing this switch again resumes the normal state (supported in WindowsServer 2003).123 4 5 6 789
