2-18 General DescriptionRemote ManagementThe server may be monitored and managed via LAN/WAN by using EXPRESSSCOPE Engine 2and NEC DianaScope utility stored in NEC EXPRESSBUILDER DVD.The EXPRESSSCOPE Engine 2 uses BMC (Baseboard Management Controller) as a systemmanagement LSI.The EXPRESSSCOPE Engine 2 provides the following features: Monitoring of power supply unit Monitoring of temperature, voltage, fans, and electric power status Generation of SEL (system event log) at occurrence of hardware failure Monitoring of the system management watchdog timer Monitoring of the periodic SMI timer Remote management by using Web browser (e.g., resetting the server, power on/off,viewing System Event Log (SEL)) Remote KVM and remote device features (A separately priced remote managementlicense is required.) Remote management via LAN/WAN by using NEC DianaScope and centralizedmanagement of several systemsFor more information about remote management using Web browser, remote KVM feature, andremote device feature, refer to the "EXPRESSSCOPE Engine 2 User's Guide" stored in NECEXPRESSBUILDER DVD.NOTE: The measured value of temperature, voltage, fan, or electricpower may contain an error. Depending on operating environment, anerror may be several tens percent.
