Installing Windows Server 2003 x64 Editions E-15DRIVER INSTALLATION AND ADVANCED SETTINGSThis section describes on how to install and setup various standard drivers mounted on the device.For the information on installing and setting up the driver that is not described in this section, pleaserefer to the document attached to the driver.Setting for Receive Side ScalingYou need to change setting for the factory-installed network adapters (Intel(R) PRO/1000 EBNetwork Connection with I/O Acceleration and Intel(R) PRO/1000 EB Network Connection withI/O Acceleration #2).IMPORTANT: With Windows Server 2003 64-bit (x64) Editions,perform the following steps before installing Intel(R) PROSet.1. Open [Control Panel]. Under [System and Maintenance], click [Open Device Manager] tostart [Device Manager].2. Open [Network adapters], and then double-click [Intel(R) PRO/1000 ∼].3. Select [Advanced], change [Receive Side Scaling] to "Disabled".4. Click [OK].5. Restart the system.Now the setting is complete.IMPORTANT: With Windows Server 2003 64-bit (x64) Editions,[Receive Side Scaling] may not appear if the Intel(R) PROSet hasalready been installed. In this case, you need to uninstall the PROSetbefore changing [Receive Side Scaling]. See "PROSet" for how touninstall PROSet.
