Troubleshooting 8-25MEMORY DUMPIf an error occurs, the dump file should be saved to acquire necessary information.If you saved the dump to DAT, write down that it is saved as "NTBackup" or "ARCServe" on thelabel. You can specify the location to save the diagnostic information as you like. For moreinformation, see Chapter 5 for detail.IMPORTANT: Consult with your service representative before dumping thememory. Dumping the memory while the CPU blade is in thesuccessful operation may affect the system operation. Restarting the system due to an error may display a messageindicating insufficient virtual memory. Ignore this message andproceed. Restarting the system may result in dumping improperdata. Dumping memory is not available in Linux operating system.Press the DUMP switch to save the dump file when an error occurs. Insert a metal pin (astraightened large paper clip will make a substitute) into the switch hole to press the DUMP switch.12IDPressing the DUMP switch saves the dump file in the specified directory. (Memory dumping maynot be available when the CPU stalls.)DUMP switch
