Installing the Operating System B-47SETTING RECEIVE SIDE SCALINGTwo standard network adapter and optional network board need to change the Receive Side Scalingsetting.Please execute the following procedures.NOTE: This is common procedure for all Windows OS.IMPORTANT: Set it in the following procedure before installingIntel® PROSet in the case of Windows Server 2003/Windows Server2003 x64 Editions.1. Open the [Device Manager].2. Open the property of [Intel(R) PRO/100…] or [Intel(R) PRO/1000…] under [NetworkAdapter] tree.3. Click [Advanced] tab.4. Change setting of the [Receive Side Scaling] to "Disabled".5. Reboot the system.IMPORTANT: If [Receive Side Scaling] is not displayed on WindowsServer 2003/Windows Server 2003 x64 Editions, uninstall Intel(R)PROSet according to [Uninstall Intel® PROSet].Set the [Receive Side Scaling] in above procedure.When re-install Intel® PROSet, refer to [PROSet] (Page B-35, 36).Uninstall Intel® PROSet1. Open the [Control Panel] and double click [Add or Remove Programs].2. Intel® PROSet is present if the following is displayed in the list.Intel(R) Network Connections 13.2.8.03. Select above [Intel(R) PRO Network…], click [Change/Remove], and Select [All driversand software] on [Remove Options] dialog.4. Click [Remove] button.5. Click [Finish] button.6. Close all windows and reboot the system.
