Installing the Operating System B-41Setup TeamingWhen the system is Windows Server 2008 64-bit (x64) Editions / 2008 32-bit (x86)EditionsIMPORTANT: Teaming is not supported with Windows Server Core. SFT is not supported. Please confirm the port setting of switching hub (L2) matches theserver network adapter Teaming mode. AFT/ALB setting must be done after System Update completed andPROSet install completed.1. Open the [Device Manager].2. Open [Network adapters] → [Intel(R)xxx] properties.3. Click [Teaming] tab and check the [Team this adapter with other adapters] check box.Click [New Team].4. Fill the name of the team in [Specify a name for the team] and click [Next].5. Include the adapter to the team and click [next].6. Select a team type ([Adapter Fault Tolerance]/[Adaptive Load Balancing]).Click [next].7. Click [Finish].8. Click [TEAM:"Team name"] from [Device manager] → [Network adapters] to modify theteam.Click [Settings] tab and click [Modify Team] button.9. Refer to the following procedure to set the team member adapter priority status.– Set PrimaryPoint the adapter and click [Set Primary] button.– Set SecondaryPoint the adapter and click [Set Secondary] button.NOTE: Adapter priority config can be confirmed by the followingprocedure1. Click [TEAM:"Team name"] from [Device manager] → [Networkadapters].2. Click [Settings] and confirm Adapters in team list.
