8-26 TroubleshootingRECOVERY FOR Windows SYSTEMIf any file necessary for running the OS is damaged, use the following procedures to recover thesystem.IMPORTANT: Make sure that the keyboard, display unit, optical disk drive, andfloppy disk drive are connected to the CPU blade. After recovering the system, see "Updating the System" in Chapter5 and be sure to update the system.Also, you need to update all the drivers after the system update. Formore information, see "Installing and Setting Device Drivers" inChapter 5. If the hard disk drive can not be recognized, you can not recover thesystem. Make keyboard entry only while the USB floppy disk drive is notaccessed (the access lamp is being off).For Windows Server 2008If the system fails to start for some reason, rebuild the system using the recovery console. Note thatthis method is recommended for only users and administrators who have a thorough knowledge ofthe recovery console.For more information, refer to Online Help.For Windows Server 2003 x64 EditionsIf the system fails to start for some reason, rebuild the system using the recovery console. Note thatthis method is recommended for only users and administrators who have a thorough knowledge ofthe recovery console.For more information, refer to Online Help.For Windows Server 2003If the system fails to start for some reason, rebuild the system using the recovery console. Note thatthis method is recommended for only users and administrators who have a thorough knowledge ofthe recovery console.For more information, refer to Online Help.
