3-4 Setting Up Your ServerMAKING CONNECTIONSConnect peripheral devices to the CPU blade.IMPORTANT: Contact the maintenance engineer in your service representative ifyou have any requests on the system configuration including theconnection to the uninterruptible power supply system or autopower controller and the time schedule operation. If you are installing the CPU blade in the Blade Enclosure(SIGMABLADE), follow instructions described in the User's Guideof the Blade Enclosure.WARNINGObserve the following instructions to use the server safely. Failure to followthese instructions may result in death or serious personal injury. See pages 1-2to 1-6 for details.■ Do not hold the power plug with a wet hand.■ Do not connect earth lines to any gas tubes.CAUTIONObserve the following instructions to use the server safely. Failure to followthese instructions may cause a fire, personal injury, or property damage. Seepages 1-2 to 1-6 for details.■ Do not plug the power cord in to an improper power source.■ Do not connect the power cord to an outlet that has an illegal number ofconnections.■ Insert the power plug into the outlet as far as it goes.■ Use the authorized power cord only.■ Do not connect or disconnect any interface cable with the power cord of theserver plugged to a power source.■ Do not use any unauthorized interface cable.
