CNC Operationen-938821/2 5 - 2555.4 Automatic Programme Execution5.4.1 Loading ProgrammesRequirementsNo mode being executed.ActionsSelect the 2nd page of Mode softkeys. + MODE MODEDisplay of the 2nd page of softkeys at the bottom of the screen:TL SET LOAD UNLOADSHIFTSSelect load mode. + LOADDisplay of the "FILE LOADING" menu and the load mode indicator in the status window:LOAD1FILE LOADING MENU> 0 PROGRAMMES1 TOOL OFFSETS3 ACTIVE PROGRAMME SELECTION4 COMMUNICATIONSLINE ( ) : COMM11 - Serial line selectedTo select an item, move the cursor onto the item with the up and down arrow keys or enter the item number then press.Selecting the serial lineThe CNC serial line parameters must be set (see 8.3) according to the peripheral (See peripheral manual).Set the peripheral transmission parameters.Select the serial line set for the peripheral. +Þ or ÞThe line selected is displayed.
