7 - 10 en-938821/27.8 Not Enough Memory to Execute the Pocket ModuleMessage displayed at initialisationNOT ENOUGH ROOM FOR LOADING...POCKET ALGORITHMCONTINUE (Y/N)?CommentThere is not enough RAM to execute the pocket module even though it is present in the configuration.ActionsAcknowledge the message. + YThe system is available, but the pocket module cannot be executed.Add RAM to be able to execute the pocket module.Contact NUM customer support.7.9 Wrong Number of PLC AxesMessage displayed at initialisationWRONG NUMBER OF PLC AXESCONTINUE (Y/N)?CommentFewer PLC axes were declared by machine parameters than the number set by customisation.ActionsAcknowledge the message. + YThe system is available, but the machining modes are inhibited.The "PRSOV" system fault indicator is displayed in the status window (See 3.1.3).Edit the parameters relative to PLC axes (See Parameter Manual).Reset the system to take the new parameters into account.
