Nokia 6070 User Manual

Also see for 6070 - Cell Phone 3.2 MB: Specification sheet User guide User guide User guide

Contents

S e t t i n g s39Copyright © 2006 Nokia. All rights reserved.Send my caller ID (network service) >Set by network, Yes, or NoLine for outgoing calls (networkservice) — to select the phone line 1 or2 to make calls, if supported by yourSIM card■ PhoneSelect Menu > Settings > Phone andfrom the following options:Phone language — to set the displayand writing languageMemory status — to view the freememory and the used memory inGallery, Messaging, and ApplicationsAutomatic keyguard — to set thekeypad of your phone to lockautomatically after a preset time delaywhen the phone is in the standby modeand no function of the phone has beenused. Select On, and set the time from5 seconds to 60 minutes.Security keyguard — to set the phoneto ask for the security code when youunlock the keyguard. Enter the securitycode, and select On.When the keyguard is on, calls still maybe possible to the official emergencynumber programmed into your device.Cell info display > On — to receiveinformation from the network operatordepending on the network cell used(network service)Welcome note — to enter a welcomenote to be shown briefly when thephone is switched onOperator selection > Automatic — toset the phone automatically to selectone of the cellular networks availablein your area. With Manual, you canselect a network that has a roamingagreement with your home networkoperator.Confirm SIM service actions — See“SIM services”, p. 71.Help text activation — to selectwhether the phone shows help textsStart-up tone — to select whether thephone plays a start-up tone when thephone is switched on■ ConnectivityYou can connect your phone tocompatible devices using an infraredconnection. You can also define thesettings for packet data dial-upconnections.InfraredYou can send or receive data to or froma compatible phone or data device(for example, a computer) through theinfrared (IR) port of your phone. To usean IR connection, the device withwhich you want to establish aconnection must be IrDA compliant.