W e b68 Copyright © 2006 Nokia. All rights reserved.Select Menu > Web > Settings >Security settings > Security modulesettings and from the followingoptions:Security module details — to show thesecurity module title, status,manufacturer, and serial numberModule PIN request — to set the phoneto ask for the module PIN when usingservices provided by the securitymodule. Enter the code, and select On.To disable the module PIN request,select Off.Change module PIN — to change themodule PIN, if allowed by the securitymodule. Enter the current module PINcode, then enter the new code twice.Change signing PIN — to change thesigning PIN code for the digitalsignature. Select the signing PIN youwant to change. Enter the current PINcode, then enter the new code twice.See also “Access codes”, p. x.CertificatesImportant: Even if the use ofcertificates makes the risksinvolved in remoteconnections and softwareinstallation considerablysmaller, they must be usedcorrectly in order to benefitfrom increased security.The existence of a certificatedoes not offer any protectionby itself; the certificatemanager must containcorrect, authentic, or trustedcertificates for increasedsecurity to be available.Certificates have a restrictedlifetime. If Expired certificateor Certificate not valid yet isshown even if the certificateshould be valid, check thatthe current date and time inyour device are correct.Before changing anycertificate settings, you mustmake sure that you reallytrust the owner of thecertificate and that thecertificate really belongs tothe listed owner.