P u s h t o t a l k61Copyright © 2006 Nokia. All rights reserved.the members cannot view whenthey receive the invitation to thechannel. Only the person whocreates the private channel caninvite more members to thechannel. Enter the name for thechannel. Select Default, Listened,or Inactive. The phone indicatesthat the channel is saved and itsstatus. Default and Listened areactive channels. When you pressand hold the volume up (PTT) key tomake a channel call, the defaultchannel is called if you have notscrolled to any other channel orcontact. To send an invitation tothe channel, select Yes when thephone requests it. You can send theinvitation using a text messageor IR.The members you invite to thepublic channels can also invitemore members to the channel.2. Manual — to join an existingchannel. Enter the channel address.Select Default, Listened, orInactive. The phone indicates thatthe channel is saved and its status.Default and Listened are activechannels. When you press and holdthe volume up (PTT) key to make achannel call, the default channel iscalled if you have not scrolled toany other channel or contact.Receive an invitation1. When you receive a text messageinvitation to a channel, Channelinvitation received: is displayed.2. To view the nickname of the personwho sent the invitation and thechannel address if the channel isnot a private channel, select View.3. To add the channel to your phone,select Save. To set the status forthe channel, select Default,Listened, or Inactive.To reject the invitation, select Exit >Yes, or select View > Discard > Yes.■ PTT settingsThere are two kinds of PTT settings:settings for connecting to the serviceand settings for use.You may receive the settings forconnecting to the service from yourservice provider. See “Configurationsettings service”, p. xi. You can enterthe settings manually.See “Configuration”, p. 41.To select the settings for connecting tothe service, select Menu > Push totalk > Config. settings and from thefollowing options:Configuration — to select a serviceprovider, Default, or Personal config.for PTT service. Only the configurationsthat support the PTT service are shown.