Nokia 6070 User Manual

Also see for 6070 - Cell Phone 3.2 MB: Specification sheet User guide User guide User guide

Contents

S e t t i n g s40 Copyright © 2006 Nokia. All rights reserved.Do not point the IR (infrared) beam atanyone's eyes or allow it to interferewith other IR devices. Infrared devicesare Class 1 laser products.When sending or receiving data,ensure that the IR ports of the sendingand receiving devices are pointing ateach other and that there are noobstructions between the devices.To activate the IR port of your phone toreceive data using IR, select Menu >Settings > Connectivity > Infrared.To deactivate the IR connection, selectMenu > Settings > Connectivity >Infrared. When the phone displaysDeactivate infrared?, select Yes.If data transfer is not started within 2minutes after the activation of the IRport, the connection is canceled andmust be started again.IR connection indicatorWhen is shown continuously, theIR connection is activated, and yourphone is ready to send or receive datathrough its IR port.When blinks, your phone is tryingto connect to the other device, or aconnection has been lost.Packet data (EGPRS)Enhanced general packet radio service(EGPRS), packet data, is a networkservice that allows mobile phones tosend and receive data over an Internetprotocol (IP)-based network. It enableswireless access to data networks suchas the Internet.The applications that may use packetdata are MMS, browsing sessions, e-mail, remote SyncML, Java applicationdownloading, push to talk, instantmessaging, and the PC dial-up.To define how to use the service, selectMenu > Settings > Connectivity >Packet data > Packet data connection.Select When needed to set the packetdata connection to be establishedwhen an application needs it.The connection will be closed whenthe application is ended.Select Always online to set the phoneto automatically connect to an packetdata network when it is switched on.indicates a packet data connection.Modem settingsYou can connect the phone using an IRor a data cable (CA-42) connection toa compatible PC, and use the phone asa modem to enable packet dataconnectivity from the PC.To define the settings for connectionsfrom the PC, select Menu > Settings >Connectivity > Packet data > Packet