2. If the device asks for a PINcode or lock code, enter it,and press the leftselection key. The factorysetting for the lock code is12345.Your device may haveinternal and externalantennas. As with any radiotransmitting device, avoidtouching the antenna areaunnecessarily while theantenna is transmitting or receiving. Contact withsuch an antenna affects the communication qualityand may cause the device to operate at a higherpower level than otherwise needed and may reducethe battery life.1 — Cellular antenna2 — Antenna for Bluetooth technology, wirelessLAN, and DVB-H; GPS receiverNote that the Bluetooth, WLAN, GPS, and DVB-Hantennas are located in the back cover of yourdevice. If you change the back cover, check that thenew cover includes these antennas, otherwisethese connections stop working.Charge the battery1. Connect a compatible chargerto a wall outlet.2. Connect the power cord to thedevice. If the battery iscompletely discharged, it maytake a while before thecharging indicator starts scrolling.3. When the battery is fully charged, the chargingindicator stops scrolling. Disconnect the chargerfrom the device, then from the wall outlet.Tip: Disconnect the charger from the walloutlet when the charger is not in use. Acharger that is connected to the outletconsumes power even when it is notconnected to the device.17 Get started
