If you want the caller’s name to be spoken whenyour device rings, select Options > Personalise >Say caller's name > On. The caller’s name mustbe found in Contacts.To create a new profile, select Options > Createnew.3-D tonesPress , select Tools > Utilities > 3-D tones.With 3-D tones, you can enable three-dimensionalsound effects for ringing tones. Not all ringing tonessupport 3-D effects.To enable the 3-D effects, select 3-D ringing toneeffects > On. To change the ringing tone, selectRinging tone and the desired ringing tone.To change the 3-D effect that is applied to theringing tone, select Sound trajectory and thedesired effect.To modify the effect, select from the followingsettings:● Trajectory speed — Scroll left or right to adjustthe speed at which sound moves from onedirection to another. This setting is not availablefor all ringing tones.● Reverberation — Select the type of echo.● Doppler effect — Select On to have the ringingtone sound higher when you are closer to yourdevice, and lower when you are farther away.When you get closer to the device, the ringingtone seems to become higher, and lower whenyou move away from it. This setting is notavailable for all ringing tones.To listen to the ringing tone with the 3-D effect,select Options > Play tone. If you enable the 3-Dtones but do not select any 3-D effect, stereowidening is applied to the ringing tone.To adjust the ringing tone volume, select Tools >Profiles > Options > Personalise > Ringingvolume.Modify the standby modeTo change the look of the standby mode, press, and select Tools > Settings > General >Personalisation > Standby mode > Standby42 Personalise your device